What it shows
On this tab, you can specify the following:
| In this group … | you can specify … |
|---|---|
|
Activation Condition |
where the driver is activated. Typically, the driver runs on the server, but if you are using distributed drivers, it can run on the operator station. |
|
Activation Interval |
How often you want to activate the driver. |
|
Driver Messages per Channel |
How many messages the driver must be able to handle concurrently. |
|
Segment Length |
The max. length of a message segment supported by the PLC. |
How it looks
The figure below shows the Advanced tab.