What it shows
When you select a node in the tree view which is reached via a remote connection (modem or other scheduled connection), this tab appears.
The following properties are available:
|
This property … |
allows you to … |
|
Phone number |
type the phone number of the PLC you want to connect to. |
|
Connect at specific points in time |
connect to the PLC at specific times. |
|
Connect at fixed time intervals |
connect to the PLC with a fixed time interval (given in minutes). |
|
Connection hold time |
specify the time you want to hold the remote connection open when the operator goes manually online or sends a command to the remote PLC. |
How it looks
The figure below shows the Remote Connection tab.