Configuring Sync Server parameters

  1. Make sure that the two IGSS servers in the system are up and running.
  2. Click on the SYNC icon images\DualSync_icon.gif , and the dialog box called Sync Server Configuration appears.

images\SyncServer_cfg.gif

  1. Key in the respective IP addresses for SERVER A and for SERVER B.
  2. Click on the Start Sync button.

The Sync Server application will now connect to the two servers and check if the two IGSS configurations are identical. If this is not the case, then you must choose which server to upload to and click on the appropriate button.

Example: You click Start Sync and the message appears telling you that Server A is old (compared to Server B). But before synchronization can take place, the two must be identical. Therefore, you would click the button Upload to Server A.

To upload automatically, select the checkbox Upload new configuration to server automatically

 

For a description of the parameters Local object, Local ACK and Alarm inhibit, click here.

 

Important: Sync Server will only synchronize objects if the configurations on the two servers are found to be identical.