Introduction
The first scenario guides you through the creation of a reusable diagram based on a diagram in the IGSS Demo configuration. The reusable diagram feature is best described through practical examples instead of general procedures. To get a feel of the functionality, we recommend that you go through this scenario first and then try creating a reusable diagram from scratch in a real IGSS configuration.
Example: The "Refuse Disposal" diagram
In the scenario we will create a work copy of the above diagram. The Refuse Disposal diagram is found in the Plants area of the Demo configuration. The diagram contains a few pumps, valves and temperature gauges which also illustrates how easily you can treat both analog and digital objects with this functionality.
A cutout of the Refuse Disposal diagram used in the scenario.
Scenario purpose
The purpose of the scenario is to create a reusable diagram allowing the operator to insert 3 different sets of objects (groups). The objects are as follows:
|
Group name |
||||
|
RefDisp_1 (Control group) |
RefDisp_2 |
RefDisp_3 |
||
|
p1_1 |
p1_2 |
p1_3 |
||
|
p2_1 |
p2_2 |
p3_2 |
||
|
p3_1 |
p3_2 |
p3_3 |
||
|
v11_1 |
v11_2 |
v11_3 |
||
|
v12_1 |
v12_2 |
v12_3 |
||
|
v14_1 |
v14_2 |
v14_3 |
||
|
t1_1 |
t1_2 |
t1_3 |
||
|
Temp-Profile_1 |
Temp-Profile_2 |
Temp-Profile_3 |
||
Step-by-step procedure
Click here to go through the scenario step by step.