To define an analog object using standard symbols

In the Objects menu, select the appropriate item in the lower part of the menu, for example, Analog Objects. The Object Browser dialog box appears listing the existing analog objects in the configuration.

You can also right-click at the desired position, select New in the pop-up menu, then the appropriate item in the submenu which is identical to the Objects menu.

If you want to base the object on a template, click on the + sign beside the relevant area, then the + sign beside the Analogue branch. Finally, click on the template name.
In the Create new object area, fill in a new unique object name and, optionally, a description.
Check the Name, Description and Value boxes to show this information along with the object symbol.
Click Create. The analog object properties dialog box appears.
On the Analog tab, specify the measuring range, alarm limits, set point, etc.

Click the Alarm In/Ack tab to define the bits used for alarm indication and alarm acknowledgement.

Click the Data Management Definitions tab to define how you want to collect and log data.

Click the Symbol Definition tab to choose the color and symbol to represent this object.

The symbol and the object caption appears. If you used the right-click menu, the symbol appears at the position where you clicked, otherwise the symbol appears in the upper left corner of the diagram.