To define a standard digital object

In the Objects menu, select, for example, Motors, Valves in the lower part of the menu. The Object Browser dialog box appears.

You can also right-click at the desired position, select New in the pop-up menu, then the appropriate item in the submenu which is identical to the Objects menu.

Type a unique name and an optional description.
Check the Name and Value boxes to show this information along with the object symbol.
Click OK. The properties dialog box for the standard digital object appears.
On the Change State tab, select the state you want to be the initial one and, optionally, type an analog value in the Free Value box to connect that value to the digital object.
Click the Data Management Definitions tab to define how you want to collect and log data.

Click the Symbol Definition tab to choose the color and symbol to represent this object.

It is recommended to use different colors for different states to help the operator easily recognise the current state of the object.

The symbol and the object caption appears. If you used the right-click menu, the symbol appears at the position where you clicked, otherwise the symbol appears in the upper left corner of the diagram.