Open topic with navigation
Set up the alarm server
On the alarm server, you specify each user you want to authorize to
view alarms via Super Alarm.
- Open the
System Configurationprogram.
- Select the
server station and click the Access Control
tab.
- Click Add User.
- Type the
appropriate user name and password and click OK.
- The users permitted
to use Super Alarm are completely separate entities from the users defined
in User Administration. An authorised Super Alarm user need not necessarily
be an authorised user in User Administration and vice versa.
- Repeat steps
2 and 3 for all Super Alarm users.
- In the TCP/IP port field, type the logical
port number you want to use.
- It is recommended
to use the default port number. Do not use port numbers lower than 4000,
as they are often used for other purposes.
The Super Alarm server is now set up and the client can connect to the
server using an authorized user name and password.
To edit or remove a Super Alarm user, select the
user name and click Edit
User or Remove User, respectively.
Open topic with navigation